Are you looking for Anti-Slip Epoxy for Commercial Kitchens in Penrith?

Are you looking for Anti-Slip Epoxy for Commercial Kitchens in Penrith?

everything you need to know about Anti-Slip Epoxy for Commercial Kitchens in Penrith. In food preparation places, known as commercial kitchens, Epoxy Floor Coatings are of significance as the flooring has a decisive effect in entire equipment. Our floor coating solutions for commercial kitchens are of the highest standards and help to meet industry guidelines for good hygiene practice. These Epoxy Coatings are also production-efficient, long-lasting and thick enough to make a preservative layer.

Food industry floors

Food industry floors have by nature exposure to contaminants causing serious damage to concrete due to their corrosive nature. Furthermore, these types of impurities can penetrate uncoated concrete surfaces, giving rise to the growth of bacteria and thus degrade processed food’s purity. Here in Penrith. we provide a seamless, impermeable obstacle which is easy to clean, ensuring a hygienic surface that is secure to step on.

Using quick turnaround systems

Using quick turnaround systems, we select nonworking hours in Penrith and weekends to work for you in order to minimize disruption to your normal business activities. Our experts are prepared to give concentrated specialized services with the most logical rate in the market. Although are fully prepared for small tasks, at the same time we are fully able to implement great projects.

Honesty and integrity are the crucial promise of our business where we force ourselves to provide the perfect best concrete resurfacing services available in Penrith

Useful tips as well as FAQ:

1- What kind of options for commercial kitchen floor coating do you suggest?

100% solids epoxies can work; though, for commercial kitchens Poly-Cement finishes are a better option by a big margin.

2- What is the discrepancy between the two?

application of epoxies cost less, whereas Poly-cement finishes are more costly. for epoxies DIY or handyman’s using rollers are usually applied; however, Poly-Cement must be applied with trowel used by trained applicators.

Epoxies that are applied correctly last for 3-7 years, while a Poly-cement finish can last up to 15 years.
Contractors use specialized sand to increase an epoxy’s thickness and bulk it up. The problem is that too much sand will lower the quality of the finish, resulting in signs of wear in high traffic areas after a while.

3- How does the cost differentiate?

The cost will depend on a variety of factors, such as:

• area size

• condition of the floor

• necessary preparation and thickness of the coating system.

for example, a 2 mm epoxy system can apply for about $80.00 per SQM, on floors over 60 SQM, while a Poly-Cement system will generally be 30% – 40% more expensive to deploy.

4- What product we would suggest applying on our jobs in Penrith?

We would recommend Sika Australia’s floor coating products.

5- My epoxy floor is failing, why?

Unfortunately, most jobs appear the same when they are first completed, but only after 3 – 7 months, the coating will show signs of failure. There are a variety of reasons why an epoxy floor coating is failing and, whilst each case is different, here are a few of the common points that we confront on a day-to-day basis:

• success of a coating system well is up to the level and quality of preparation as the central requirement; obviously, weak preparation is the key factor causing an epoxy floor not to respond.

• Bad news is that some contractors tend to quote the job as low as possible just to guarantee the works, and then take detours to make sure they gain a profit on the job.

Common shortcuts are as listed below:

1. a) Weak or no preparation

1. b) Use of low-quality epoxies

1. c) Using thin layers

1. d) adding excessive amount of sand or fillers to bulk up the epoxy to make it more economical

Moisture is another significant factor – since epoxies have very little bear of moisture, they will lift in case of hydrostatic pressure. Accordingly, for cool rooms and adjacent rooms, we suggest a Poly-Cement coating as a much better option.

6- Qualities for choosing a proper as well as qualified contractors.

Online checking can be a big hand. Read online profiles and review old clients have left for the contractor. Looking for genuine website and project pictures can ensure they are not scam.
Contact local references they introduce, especially to those living close by in Penrith This helps you check different aspects of their work. Speaking directly to real-life clients prov to be the most trustworthy way to verify a company’s services they claim.

Taking works of more than 6-month-old into your account can also help. It needs about 2 to 6 months for coating to show their real face and if they have any defects.

Ask for an actual sample to install on your floor for 4 weeks before making decision if you want to keep going as these systems are lasting and make sure you are getting what you want.

Although a cost-effective offer matters, never sacrifice quality for price.

At Penrith Epoxy Floors integrity and delivering what has promise is our number one priory. We do not prioritize the quality of your work over our own profit.